Repara tus cosas Comunidad Tienda

Turtle Beach Ear Force XO One Speaker Replacement

Introducción

If you're experiencing poor sound quality, you might need or want to replace your speaker. This guide shows the steps necessary to replace the speaker.

Qué necesitas

  1. Turtle Beach Ear Force XO One Speaker Replacement, Speaker: paso 1, imagen 1 de 1

    • Start with the ear padding facing up.

    Editar

  2. Turtle Beach Ear Force XO One Speaker Replacement: paso 2, imagen 1 de 3 Turtle Beach Ear Force XO One Speaker Replacement: paso 2, imagen 2 de 3 Turtle Beach Ear Force XO One Speaker Replacement: paso 2, imagen 3 de 3

    • Remove the ear padding by separating the fabric piece from the plastic headphone piece.

    • The leather padding will slide off the plastic piece holding it in place. Don't be afraid to pull with a little force.

    Editar

  4. Turtle Beach Ear Force XO One Speaker Replacement: paso 3, imagen 1 de 2 Turtle Beach Ear Force XO One Speaker Replacement: paso 3, imagen 2 de 2

    • Use a Philips head screwdriver to remove the speaker cover.

    • Be careful the speaker is attached to the chip inside by wires.

    • The recommended screwdriver bit size is a PH 0.

    Editar

    • Once the speaker cover is removed, the wires can be cut or de-soldered.

    • Remove the speaker.

    • Insert the new speaker

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 1 otro colaborador

Stephen Reilly

Miembro Desde 10/28/15

128 Reputación

1 Guía escrita

Insignias: 4

+1 mas insignia

Equipo

UMass Dartmouth, Team 3-1, Shastany Fall 2015 Miembro de UMass Dartmouth, Team 3-1, Shastany Fall 2015

UMASSD-SHASTANY-F15S3G1

3 Miembros

6 Guías creadas

Un comentario

what speaker can i use as a replacement and where can I buy one?

Tristan Williams - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 2,789