Repara tus cosas Comunidad Tienda

Turtle Beach Ear Force XO Four Microphone Replacement

Introducción

This guide will exhibit how to replace the microphone board. Soldering is required to detach and replace the board, so refer to the soldering replacement guide for more information.

Qué necesitas

  1. Turtle Beach Ear Force XO Four Microphone Replacement, Microphone: paso 1, imagen 1 de 3 Turtle Beach Ear Force XO Four Microphone Replacement, Microphone: paso 1, imagen 2 de 3 Turtle Beach Ear Force XO Four Microphone Replacement, Microphone: paso 1, imagen 3 de 3

    • Gently remove the foam pad from the microphone by pulling it apart.

    Editar

  3. Turtle Beach Ear Force XO Four Microphone Replacement: paso 2, imagen 1 de 1

    • Remove the PH0 7.1 mm screw from the back casing.

    Editar

  4. Turtle Beach Ear Force XO Four Microphone Replacement: paso 3, imagen 1 de 2 Turtle Beach Ear Force XO Four Microphone Replacement: paso 3, imagen 2 de 2

    • Remove the back casing from the microphone.

    • Desolder the two wires from the back of the microphone. For instructions on soldering, please see iFixit's soldering guide.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

7 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Cody Barrett

Miembro Desde 09/22/15

453 Reputación

2 Guías creadas

Insignias: 10

+ 7 más insignias

Equipo

Baylor, Team 10-14, Williams Fall 2015 Miembro de Baylor, Team 10-14, Williams Fall 2015

BU-WILLIAMS-F15S10G14

3 Miembros

8 Guías creadas

Un comentario

I have a turtle beach recon 200 and there is no category here for it. I have gotten water into my microphone and I do not know how to fix it. My mic is attached to the headset. I have tried blowing into it and wiping it. None of that works. Please help.

Jacob Krantz - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 6

Todo El Tiempo: 8,922