Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

  1. Flip the keyboard over.
    • Flip the keyboard over.

  2. Remove the three JIS #1 screws from the back cover. Remove the three JIS #1 screws from the back cover.
    • Remove the three JIS #1 screws from the back cover.

  3. Pry at these points with a plastic opening tool to unclip the two halves of the keyboard case. Pry at these points with a plastic opening tool to unclip the two halves of the keyboard case.
    • Pry at these points with a plastic opening tool to unclip the two halves of the keyboard case.

  4. Pull apart the two parts of the panel to expose the motherboard and keys.
    • Pull apart the two parts of the panel to expose the motherboard and keys.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Myron Myers

Miembro Desde 21/02/18

109 Reputación

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 132