Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Thoroughly clean the surface where you'll be applying the trunk LED tail gate lamp.
-
Use soap and water to scrub the area clean since that place is normally dirty.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully measure beforehand where you're going to attach the LED strip so it looks even.
-
The LED tailgate strip is designed to be a little bit shorter than the trunk tailgate.
-
Straighten the LED strip and peel adhesive.
-
OPTIONAL: The package includes 4 mounting brackets with screws. You can use these to further secure the LED tailgate lights.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Tap reverse light wire.
-
You will need to remove either side of the tail light to locate the reverse light.
-
Use a T-tap to tap the reverse light wire from the tailgate LED strip to positive.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
This is the trailer light connector. You can see: ground, brake, left signal, right signal - plug that into stock trailer light connector.
-
You will find the trailer light connector near the tow hitch.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Hide the wires or zip-tie them.
-
Check the trunk LED tailgate lamp to make sure everything works.
-
Cancelar: No complete esta guía.
5 personas más completaron esta guía.
21 comentarios
Should my light bar come on with my headlights they worked without the headlights but when I turn headlights on they don't work what's wrong
did you get a answer to your problem because I'm having the same problem
Anyone have the answer to this problem yet?
Trevor G -
I bought a led third brake below the tailgate and i have five wires on the led light.what is the wiring diagram for it
