Saltar al contenido principal

Tristar Handmixer Gears Replacement

Qué necesitas

  1. Tristar Handmixer Gears Replacement, Gears: paso 1, imagen 1 de 3 Tristar Handmixer Gears Replacement, Gears: paso 1, imagen 2 de 3 Tristar Handmixer Gears Replacement, Gears: paso 1, imagen 3 de 3
    • Remove all the screws with the spanner and Phillips screwdrivers.

  2. Tristar Handmixer Gears Replacement: paso 2, imagen 1 de 3 Tristar Handmixer Gears Replacement: paso 2, imagen 2 de 3 Tristar Handmixer Gears Replacement: paso 2, imagen 3 de 3
    • Take off the mixer heads.

    • Push the eject button to do so.

    • Put the mixer in mode 5.

    • Gently open the mixer.

    • The spring might jump loose!!

  3. Tristar Handmixer Gears Replacement: paso 3, imagen 1 de 3 Tristar Handmixer Gears Replacement: paso 3, imagen 2 de 3 Tristar Handmixer Gears Replacement: paso 3, imagen 3 de 3
    • Remove the eject button by carefully lifting it out.

    • Remove the cable holder using the Phillips screw driver.

    • Remove the screw holding the mode button.

    • Carefully lift out the electrical unit.

  4. Tristar Handmixer Gears Replacement: paso 4, imagen 1 de 2 Tristar Handmixer Gears Replacement: paso 4, imagen 2 de 2
    • Remove the locking rings from the back end of the gears.

    • Use 2 screwdrivers to apply force on both sides of the locking rings.

    • Lift the gears from encapsulant.

  5. Tristar Handmixer Gears Replacement: paso 5, imagen 1 de 1
    • Replace gears.

    • Reassemble the mixer.

    • Happy mixing!

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

2 comentarios

where can I get replacement gears from?

lanz - Contestar

Thats what I want to know too. I have a Hamilton Beach hand mixer. The gears look the same as the one shown in this article

Shaik Shahnaz -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 5

Ultimos 30 días: 24

Todo El Tiempo: 1,544