Repara tus cosas Comunidad Tienda

Trio Stealth-Mini Screen Replacement

Introducción

Tablet screens often get damaged, this guide will walk a user through the steps of replacing a damaged screen. It is important to be careful about damaging parts, as most pieces are fragile.

Qué necesitas

  1. Trio Stealth-Mini Screen Replacement, Battery: paso 1, imagen 1 de 2 Trio Stealth-Mini Screen Replacement, Battery: paso 1, imagen 2 de 2

    • Locate the indentation at the bottom of the device.

    Editar

  2. Trio Stealth-Mini Screen Replacement: paso 2, imagen 1 de 3 Trio Stealth-Mini Screen Replacement: paso 2, imagen 2 de 3 Trio Stealth-Mini Screen Replacement: paso 2, imagen 3 de 3

    • Pull on the indentation and take off the casing of the device.

    Editar

  3. Trio Stealth-Mini Screen Replacement: paso 3, imagen 1 de 2 Trio Stealth-Mini Screen Replacement: paso 3, imagen 2 de 2

    • Remove the faulty battery and insert a replacement in its slot.

    Editar

  4. Trio Stealth-Mini Screen Replacement, Screen: paso 4, imagen 1 de 1

    • Remove the six 2.4 mm, Phillips #0 screws circled in the image.

    Editar

  6. Trio Stealth-Mini Screen Replacement: paso 5, imagen 1 de 1

    • Remove inner casing exposing the motherboard.

    Editar

  7. Trio Stealth-Mini Screen Replacement: paso 6, imagen 1 de 2 Trio Stealth-Mini Screen Replacement: paso 6, imagen 2 de 2

    • Remove speakers by peeling back yelllow tape.

    Editar

  8. Trio Stealth-Mini Screen Replacement: paso 7, imagen 1 de 1

    • Remove ribbon cable on top of motherboard.

    Editar

  9. Trio Stealth-Mini Screen Replacement: paso 8, imagen 1 de 1

    • Peeling back yellow tape, remove the 2.5 mm Phillips #0 screws on top of motherboard.

    Editar

  10. Trio Stealth-Mini Screen Replacement: paso 9, imagen 1 de 1

    • Remove the three 2.5 mm Phillips #0 screws attaching screen to main assembly.

    Editar

  11. Trio Stealth-Mini Screen Replacement: paso 10, imagen 1 de 1

    • Verify that all screws are detached from screen.

    Editar

  12. Trio Stealth-Mini Screen Replacement: paso 11, imagen 1 de 1

    • Detach screen from main assembly.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Stewart Jenkins

Miembro Desde 03/26/18

207 Reputación

1 Guía escrita

Insignias: 3

Equipo

IUPUI, Team S1-G1, Harley Spring 2018 Miembro de IUPUI, Team S1-G1, Harley Spring 2018

IUPUI-HARLEY-S18S1G1

7 Miembros

6 Guías creadas

Un comentario

How can I do step 5? Do i need to push on the rectangle slots? It’s not very descriptive.

Nick “Blue” Wong - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 223