Repara tus cosas Comunidad Tienda

Tribit XSound Go TS-BTS20 Speaker Replacement

Introducción

Is your Tribit Xsound Go speaker sounding grainy or low? The water, dirt, or even rust may cause a replacement for the speaker driver for a much clear and transparent sound. The following steps are easy to follow.

Qué necesitas

  1. Tribit XSound Go TS-BTS20 Speaker Replacement, Speaker: paso 1, imagen 1 de 2 Tribit XSound Go TS-BTS20 Speaker Replacement, Speaker: paso 1, imagen 2 de 2

    • Insert a spudger in the seam between the front speaker grill and chassis.

    • Pry around the perimeter until the front grill releases.

    • Remove the front grill.

    Editar

  3. Tribit XSound Go TS-BTS20 Speaker Replacement: paso 2, imagen 1 de 2 Tribit XSound Go TS-BTS20 Speaker Replacement: paso 2, imagen 2 de 2

    • Remove the 14 Phillips screws around the perimeter of the speaker.

    Editar

  4. Tribit XSound Go TS-BTS20 Speaker Replacement: paso 3, imagen 1 de 3 Tribit XSound Go TS-BTS20 Speaker Replacement: paso 3, imagen 2 de 3 Tribit XSound Go TS-BTS20 Speaker Replacement: paso 3, imagen 3 de 3

    • Disconnect both wires connected to speakers and motherboard.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 9

Ultimos 30 días: 42

Todo El Tiempo: 153