Repara tus cosas Comunidad Tienda

Trek 820 Tail Light Mounting Bracket Replacement

Qué necesitas

  1. Trek 820 Tail Light Mounting Bracket Replacement, Tail Light Mounting Bracket: paso 1, imagen 1 de 1

    • Obtain one tail light mounting bracket and one screw as shown in the picture.

    • The screw should be removed from the mounting bracket.

    Editar

  2. Trek 820 Tail Light Mounting Bracket Replacement: paso 2, imagen 1 de 1

    • Clean the bicycle seat post and mounting bracket.

    • Wrap the mounting bracket strap around the seat post.

    • Verify the larger piece rests towards the tail end aligned with the tires.

    • Verify the bracket's screw hole is on the right side of the bicycle.

    Editar

  4. Trek 820 Tail Light Mounting Bracket Replacement: paso 3, imagen 1 de 2 Trek 820 Tail Light Mounting Bracket Replacement: paso 3, imagen 2 de 2

    • Locate the slot on the bracket where the strap will be inserted.

    • Insert the strap into the slot.

    • Tighten the strap just enough to keep the bracket in place.

    Editar

  5. Trek 820 Tail Light Mounting Bracket Replacement: paso 4, imagen 1 de 2 Trek 820 Tail Light Mounting Bracket Replacement: paso 4, imagen 2 de 2

    • Insert the screw into the bracket screw hole.

    • Tighten the screw with fingers until the mounting bracket rests freely on seat post.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 6 otros colaboradores

Kaveh Karimiyanha

Miembro Desde 09/24/12

813 Reputación

7 Guías creadas

Insignias: 10

+ 7 más insignias

Equipo

Cal Poly, Team 1-1, Propen Fall 2012 Miembro de Cal Poly, Team 1-1, Propen Fall 2012

CPSU-PROPEN-F12S1G1

5 Miembros

9 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 1,116