Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Use this guide you to remove or replace your pedals for the Trek 820.

Pedals are the least serviced parts of a bike and can become a problem when bushes and bearings are worn. Rough pedals that have a hard knock or don’t release to your cleats should be replaced.

Herramientas

Partes

No se especificaron partes.

  1. Lock the 7/16" wrench with the pedal and carefully unscrew until it comes off. Unscrew the left pedal clockwise and the right pedal counter-clockwise. Unscrew the left pedal clockwise and the right pedal counter-clockwise.
    • Lock the 7/16" wrench with the pedal and carefully unscrew until it comes off.

    • Unscrew the left pedal clockwise and the right pedal counter-clockwise.

  2. Replace the old pedal with the new one. Screw in the left pedal counter-clockwise and the right pedal clockwise. Screw in the left pedal counter-clockwise and the right pedal clockwise.
    • Replace the old pedal with the new one.

    • Screw in the left pedal counter-clockwise and the right pedal clockwise.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Equipo

Cal Poly, Team 1-1, Propen Fall 2012 Miembro de Cal Poly, Team 1-1, Propen Fall 2012

CPSU-PROPEN-F12S1G1

5 Miembros

9 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 4

Ultimos 30 días: 12

Todo El Tiempo: 2,371