Trek 4300 Bicycle Rear Wheel Replacement

Introducción

The rear wheel is removed similarly to the front wheel, however it will require maneuvering around the chain and gear mechanism.

Paso 1 Rear Wheel

Trek 4300 Bicycle Rear Wheel Replacement, Rear Wheel: paso 1, imagen 1 de 1

Stand behind your bike straddling the rear wheel and locate the brake calipers.
To lessen the tension on the brake wire, place one hand on each caliper and push them towards one another.

Editar

Paso 2

Unhook the brake wire in the metal tube from the brake wire holder on the caliper in your left hand.

Editar

Paso 3

Find the quick release lever located on the wheel's fork.
Open the leaver 180 degrees from the locked position.
Spin the lever counterclockwise a few turns to loosen the pin while holding the opposite of the pin.

Editar

Paso 4

Pull the bike frame upward off the wheel fork to separate it from the rear wheel.
Remove the bottom chain from around the rear cassette on the wheel.

Editar

Paso 5

In reassembly, lay the top chain on the lowest gear on the rear cassette. Then follow the steps in reverse order beginning with step 3.

Editar

Conclusión

To reassemble your device, lay the top chain on the smallest gear of the rear cassette and then follow the steps in reverse order beginning with step 3.

Una persona más ha completado esta guía.