Repara tus cosas Comunidad Tienda

Toshiba Tecra M2 CPU Replacement

Qué necesitas

  1. Toshiba Tecra M2 CPU Replacement, Battery: paso 1, imagen 1 de 1

    • Flip the laptop upside down so the back compartment is facing up.

    • Place left thumb on the battery lock tab.

    • Place right thumb on the battery release latch.

    Editar

  2. Toshiba Tecra M2 CPU Replacement: paso 2, imagen 1 de 2 Toshiba Tecra M2 CPU Replacement: paso 2, imagen 2 de 2

    • Slide both tabs outward at the same time to release battery pack.

    Editar

  3. Toshiba Tecra M2 CPU Replacement: paso 3, imagen 1 de 1

    • Pull out the battery after it has popped out and set aside.

    • The battery and the battery cover are in one piece

    Editar

  4. Toshiba Tecra M2 CPU Replacement, CPU: paso 4, imagen 1 de 1

    • Use a #00 phillips head screwdriver to remove the 8mm screw for the keyboard strip located under the battery.

    Editar

  5. Toshiba Tecra M2 CPU Replacement: paso 5, imagen 1 de 1

    • Turn the device over and open it up to the display.

    • Gently lift a corner of the keyboard strip until it pops out of its position.

    Editar

  6. Toshiba Tecra M2 CPU Replacement: paso 6, imagen 1 de 1

    • Using a #00 phillips head screwdriver, remove the two 4mm screws found underneath the keyboard strip.

    Editar

  8. Toshiba Tecra M2 CPU Replacement: paso 7, imagen 1 de 2 Toshiba Tecra M2 CPU Replacement: paso 7, imagen 2 de 2

    • Pop the keyboard up gently and rest on top of the touch pad

    • The keyboard is attached underneath by a thin film. Do not rip the keyboard off. Gently lay it down without ripping the film.

    Editar

  9. Toshiba Tecra M2 CPU Replacement: paso 8, imagen 1 de 2 Toshiba Tecra M2 CPU Replacement: paso 8, imagen 2 de 2

    • Using a #00 phillips head screwdriver, remove the 6mm screw holding the metal plate down.

    Editar

  10. Toshiba Tecra M2 CPU Replacement: paso 9, imagen 1 de 2 Toshiba Tecra M2 CPU Replacement: paso 9, imagen 2 de 2

    • Gently remove the keyboard connector film from the motherboard with fingers by lifting upwards.

    • Set aside the keyboard.

    Editar

  11. Toshiba Tecra M2 CPU Replacement: paso 10, imagen 1 de 1

    • Using a #00 phillips head screwdriver, remove the three 13mm screws holding down the touch pad's frame from underneath the keyboard.

    Editar

  12. Toshiba Tecra M2 CPU Replacement: paso 11, imagen 1 de 3 Toshiba Tecra M2 CPU Replacement: paso 11, imagen 2 de 3 Toshiba Tecra M2 CPU Replacement: paso 11, imagen 3 de 3

    • Flip laptop back upside down.

    • Remove the 5mm lock screw, using a #00 phillips head screwdriver.

    • Slide bay latch toward the battery compartment.

    • Remove CD-RW/DVD-ROM drive.

    Editar

  13. Toshiba Tecra M2 CPU Replacement: paso 12, imagen 1 de 1

    • Remove the 4.5mm screw located under the CD-RW/DVD-ROM drive compartment, using a #00 phillips head screwdriver.

    Editar

  14. Toshiba Tecra M2 CPU Replacement: paso 13, imagen 1 de 1

    • Remove the three 17mm screws found on the backside of the laptop using a #00 phillips head screwdriver.

    • Remove the ten 8mm screws using a #00 phillips head screwdriver.

    Editar

  15. Toshiba Tecra M2 CPU Replacement: paso 14, imagen 1 de 2 Toshiba Tecra M2 CPU Replacement: paso 14, imagen 2 de 2

    • Flip the laptop back over and unplug the touch pad's power cord from the motherboard gently using a pair of tweezers.

    Editar

  16. Toshiba Tecra M2 CPU Replacement: paso 15, imagen 1 de 2 Toshiba Tecra M2 CPU Replacement: paso 15, imagen 2 de 2

    • Lift off the plastic cover and set it aside.

    Editar

  17. Toshiba Tecra M2 CPU Replacement: paso 16, imagen 1 de 2 Toshiba Tecra M2 CPU Replacement: paso 16, imagen 2 de 2

    • Using a #00 phillips head screwdriver, unscrew the three 5mm screws holding down the heat sink securing bracket.

    • Lift off the securing bracket and set aside.

    Editar

  18. Toshiba Tecra M2 CPU Replacement: paso 17, imagen 1 de 1

    • Wiggle the heat sink until it lifts off the top of your CPU. There is thermal paste underneath and it may stick.

    Editar

  19. Toshiba Tecra M2 CPU Replacement: paso 18, imagen 1 de 3 Toshiba Tecra M2 CPU Replacement: paso 18, imagen 2 de 3 Toshiba Tecra M2 CPU Replacement: paso 18, imagen 3 de 3

    • Turn a flathead #3 screwdriver counter-clockwise to unlock the CPU socket.

    • Grab the CPU with your index finger and thumb and pull directly upwards.

    • Apply a new coat of thermal paste before reassembling.

    • Cómo aplicar pasta térmica

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 4 otros colaboradores

Cindy Nguyen

Miembro Desde 09/08/14

386 Reputación

3 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

CSU Fullerton, Team 1-6, Bruce Fall 2014 Miembro de CSU Fullerton, Team 1-6, Bruce Fall 2014

CSUF-BRUCE-F14S1G6

3 Miembros

9 Guías creadas

Un comentario

"Step 4 - CPU" THAT IS NOT A 8MM SCREW! THERE IS NOW A HOLE IN MY COMPUTER!!

[deleted] - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 12

Todo El Tiempo: 1,595