Repara tus cosas Comunidad Tienda

Toshiba Tecra 8200 Hard Drive Replacement

Introducción

If your Toshiba Tecra 8200 is running slowly or you are unable to save documents, your hard drive may need replacement.

Qué necesitas

  1. Toshiba Tecra 8200 Hard Drive Replacement, Battery: paso 1, imagen 1 de 1

    • Turn off the device and unplug the power cord.

    • To remove the battery, flip the device, so that the bottom is facing upward.

    Editar

  2. Toshiba Tecra 8200 Hard Drive Replacement: paso 2, imagen 1 de 3 Toshiba Tecra 8200 Hard Drive Replacement: paso 2, imagen 2 de 3 Toshiba Tecra 8200 Hard Drive Replacement: paso 2, imagen 3 de 3

    • Slide the battery to the right side until you hear a click.

    • Carefully remove the battery from its compartment.

    Editar

  4. Toshiba Tecra 8200 Hard Drive Replacement, Hard Drive: paso 3, imagen 1 de 3 Toshiba Tecra 8200 Hard Drive Replacement, Hard Drive: paso 3, imagen 2 de 3 Toshiba Tecra 8200 Hard Drive Replacement, Hard Drive: paso 3, imagen 3 de 3

    • Locate the hard drive panel.

    • Remove the single screw labeled F4 by using a Philips size #00 screwdriver.

    • Save the screw, as it will be needed for reassembly.

    • Remove the panel, exposing the hard drive.

    Editar

  5. Toshiba Tecra 8200 Hard Drive Replacement: paso 4, imagen 1 de 2 Toshiba Tecra 8200 Hard Drive Replacement: paso 4, imagen 2 de 2

    • Pull the tab to remove the hard drive.

    • Insert the new hard drive by pushing it into the compartment, leaving the new "pull" tab exposed.

    Editar

  6. Toshiba Tecra 8200 Hard Drive Replacement: paso 5, imagen 1 de 2 Toshiba Tecra 8200 Hard Drive Replacement: paso 5, imagen 2 de 2

    • Tuck the "pull" tab back into the hard drive compartment.

    • Replace the panel.

    • Replace the single F4 screw.

    Editar

  7. Toshiba Tecra 8200 Hard Drive Replacement: paso 6, imagen 1 de 3 Toshiba Tecra 8200 Hard Drive Replacement: paso 6, imagen 2 de 3 Toshiba Tecra 8200 Hard Drive Replacement: paso 6, imagen 3 de 3

    • Identify the connector pins on the battery.

    • Line up the connector pins on the battery with the connector pins on the computer and push inward to reconnect the battery.

    • Slide the exterior panel towards the center of the computer to lock the battery in place.

    Editar
Linea de Meta

Autor

con 7 otros colaboradores

Sally

Miembro Desde 02/17/15

306 Reputación

3 Guías creadas

Insignias: 4

+1 mas insignia

Equipo

Ohio State, Team 1-3, Buehl Winter 2015 Miembro de Ohio State, Team 1-3, Buehl Winter 2015

OSU-BUEHL-W15S1G3

3 Miembros

9 Guías creadas

Un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 6

Todo El Tiempo: 2,219