Repara tus cosas Comunidad Tienda

Toshiba TDP-XP2 Fuse Replacement

Introducción

In the rare case of a power surge, if the device is not plugged into a surge protecting outlet, the fuse will blow out and need to be replaced. This guide will show how to tear the whole projector down to get the fuse and replace it.

Qué necesitas

  1. Toshiba TDP-XP2 Fuse Replacement, Fuse: paso 1, imagen 1 de 3 Toshiba TDP-XP2 Fuse Replacement, Fuse: paso 1, imagen 2 de 3 Toshiba TDP-XP2 Fuse Replacement, Fuse: paso 1, imagen 3 de 3

    • Start by removing the two screws on the bottom of the device as shown.

    Traducir

  2. Toshiba TDP-XP2 Fuse Replacement: paso 2, imagen 1 de 2 Toshiba TDP-XP2 Fuse Replacement: paso 2, imagen 2 de 2

    • Remove the top plastic cover from the device. The back is snapped on so it would help to have leverage from a prying tool.

    • Remove the ribbon cable attached to the plastic piece just removed. Remember its orientation for re-assembling later.

    Traducir

  3. Toshiba TDP-XP2 Fuse Replacement: paso 3, imagen 1 de 3 Toshiba TDP-XP2 Fuse Replacement: paso 3, imagen 2 de 3 Toshiba TDP-XP2 Fuse Replacement: paso 3, imagen 3 de 3

    • Remove the screws from the case located around the device.

    Traducir

  4. Toshiba TDP-XP2 Fuse Replacement: paso 4, imagen 1 de 1

    • Remove the plastic panels from the body.

    Traducir

  6. Toshiba TDP-XP2 Fuse Replacement: paso 5, imagen 1 de 3 Toshiba TDP-XP2 Fuse Replacement: paso 5, imagen 2 de 3 Toshiba TDP-XP2 Fuse Replacement: paso 5, imagen 3 de 3

    • Remove the screws from the IO panel.

    • Pull up on the panel and remove it.

    Traducir

  7. Toshiba TDP-XP2 Fuse Replacement: paso 6, imagen 1 de 2 Toshiba TDP-XP2 Fuse Replacement: paso 6, imagen 2 de 2

    • Unscrew the screws from the metal shielding to remove it.

    Traducir

  8. Toshiba TDP-XP2 Fuse Replacement: paso 7, imagen 1 de 3 Toshiba TDP-XP2 Fuse Replacement: paso 7, imagen 2 de 3 Toshiba TDP-XP2 Fuse Replacement: paso 7, imagen 3 de 3

    • Remove cables from motherboard.

    • Unscrew motherboard and remove from device.

    Traducir

  9. Toshiba TDP-XP2 Fuse Replacement: paso 8, imagen 1 de 1

    • Remove the cable from the bottom of the motherboard to fully remove it.

    Traducir

  10. Toshiba TDP-XP2 Fuse Replacement: paso 9, imagen 1 de 1

    • Unscrew the power adapter on the back.

    Traducir

  11. Toshiba TDP-XP2 Fuse Replacement: paso 10, imagen 1 de 2 Toshiba TDP-XP2 Fuse Replacement: paso 10, imagen 2 de 2

    • Remove cables from the power supply board.

    • Remove the screws located around the board to un-mount it.

    Traducir

  12. Toshiba TDP-XP2 Fuse Replacement: paso 11, imagen 1 de 2 Toshiba TDP-XP2 Fuse Replacement: paso 11, imagen 2 de 2

    • Locate the fuse near where the power adapter was.

    • De-solder the fuse and replace with an equivalent fuse (Fuse leads to de-solder are marked in red).

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

Bryan Underwood

Miembro Desde 04/02/18

697 Reputación

5 Guías creadas

Insignias: 3

Equipo

University of Memphis, Team S1-G3, Kim Spring 2018 Miembro de University of Memphis, Team S1-G3, Kim Spring 2018

UM-KIM-S18S1G3

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 334