Saltar al contenido principal

Introducción

If you find that your laptop is sluggish when many programs are running, freezing, or randomly restarting. It may be time to add more RAM or replace the RAM currently in the laptop.

  1. Unscrew the single Phillips #0 screw from the RAM panel.
    • Unscrew the single Phillips #0 screw from the RAM panel.

  2. Remove the panel.
    • Remove the panel.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. Spread the clips away from the RAM module. When released, the RAM module will pop up at a slight angle.
    • Spread the clips away from the RAM module.

    • When released, the RAM module will pop up at a slight angle.

  5. Lift the RAM module to an angle of about 30 degrees and slide it out. Lift the RAM module to an angle of about 30 degrees and slide it out.
    • Lift the RAM module to an angle of about 30 degrees and slide it out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

When installing the new RAM, push the RAM sticks in at an angle. Proceed to push each RAM stick down until the latches click, indicating that it is locked in.

Una persona más ha completado esta guía.

William Mazanec

Miembro Desde 29/01/18

1,236 Reputación

8 Guías creadas

Equipo

USF Tampa, Team S5-G6, Passmore Spring 2018 Miembro de USF Tampa, Team S5-G6, Passmore Spring 2018

USFT-PASSMORE-S18S5G6

3 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 101