Saltar al contenido principal

Introducción

If you feel that your laptop is becoming hot to the touch, or you hear the fan spin up more often than usual. It may be time to clean out the processor fan or replace it entirely.

  1. Remove the fourteen 5mm Phillips #0 screws from the bottom of the laptop.
    • Remove the fourteen 5mm Phillips #0 screws from the bottom of the laptop.

  2. Using the plastic prying tools, go around the edge of the bottom of the laptop to release the cover.
    • Using the plastic prying tools, go around the edge of the bottom of the laptop to release the cover.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. Remove the four 5mm Phillips #0 screws from the battery. Unplug the battery from the motherboard. Remove the battery from the laptop.
    • Remove the four 5mm Phillips #0 screws from the battery.

    • Unplug the battery from the motherboard.

    • Remove the battery from the laptop.

  5. Remove the two 5mm Phillips #0 screws from the fan.
    • Remove the two 5mm Phillips #0 screws from the fan.

  6. Disconnect the fan from the motherboard.
    • Disconnect the fan from the motherboard.

  7. Remove the four 5mm Phillips #0 screws from the heat pipe.
    • Remove the four 5mm Phillips #0 screws from the heat pipe.

    • Remove the fan and heat pipe from the laptop.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

William Mazanec

Miembro Desde 29/01/18

1,236 Reputación

8 Guías creadas

Equipo

USF Tampa, Team S5-G6, Passmore Spring 2018 Miembro de USF Tampa, Team S5-G6, Passmore Spring 2018

USFT-PASSMORE-S18S5G6

3 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 8

Todo El Tiempo: 113