Saltar al contenido principal

Introducción

In this guide you will be replacing the Wi-Fi adapter in your laptop. You'll need to use a Phillips #1 screwdriver to complete this repair.

Partes

No se especificaron partes.

  1. Slide the tabs apart from each other.
    • Slide the tabs apart from each other.

  2. Lift the battery upwards and remove it from the device. Lift the battery upwards and remove it from the device.
    • Lift the battery upwards and remove it from the device.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. Using a Phillips #1 screwdriver, remove the screw from the back cover. Remove the back cover from the device.
    • Using a Phillips #1 screwdriver, remove the screw from the back cover.

    • Remove the back cover from the device.

  5. Remove the optical drive from the device. Remove the optical drive from the device. Remove the optical drive from the device.
    • Remove the optical drive from the device.

  6. Using a Phillips #1 screwdriver, unscrew the remaining screws that are visible on the laptop. Remove the back cover from your device.
    • Using a Phillips #1 screwdriver, unscrew the remaining screws that are visible on the laptop.

    • Remove the back cover from your device.

  7. Using a Phillips #1 screwdriver, remove the screw connecting the Wi-Fi adapter to the motherboard. Remove the Wi-Fi adapter from the device. Remove the Wi-Fi adapter from the device.
    • Using a Phillips #1 screwdriver, remove the screw connecting the Wi-Fi adapter to the motherboard.

    • Remove the Wi-Fi adapter from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 3

Últimos 30 Días: 21

Todo El Tiempo: 131