Introducción

This guide will show you how to replace your keyboard.

Partes

No se requieren partes.

Carefully pry off the panel above the keyboard from the both sides of the laptop using a flat edge tool.
  • Carefully pry off the panel above the keyboard from the both sides of the laptop using a flat edge tool.

  • Push back the screen until it is horizontal with the laptop.

  • Gently remove the clips that hold the panel onto the screen hinges.

Agregar Comentario

Remove the two screws on the upper outer edges of the keyboard with a #1 Phillips head screwdriver.
  • Remove the two screws on the upper outer edges of the keyboard with a #1 Phillips head screwdriver.

  • Gently pry the keyboard from the laptop on the upper outer edges using the flat edge tool.

  • Slowly lift the keyboard away from the laptop until you are able to remove the ribbon that connects the keyboard to the laptop.

  • CAUTION!! Make sure you remove the keyboard slowly to avoid damaging the ribbon cable.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Aryn Pauly

Miembro Desde 29/04/10

1 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 10-42, Garner Spring 2010 Miembro de Cal Poly, Team 10-42, Garner Spring 2010

CPSU-GARNER-S10S10G42

5 Miembros

10 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 7

Todo El Tiempo: 8,068