Introducción

If your computer runs more slowly than it used to, your random access memory (RAM) chip may need replacement. Use this guide to replace your RAM.

Partes

No se requieren partes.

  1. Flip the laptop over and locate the screw beneath the left battery latch.
    • Flip the laptop over and locate the screw beneath the left battery latch.

  2. Use the Phillips #1 screwdriver to remove the screw.
    • Use the Phillips #1 screwdriver to remove the screw.

    • Using a metal spudger, slip it into the groove and gently pry open the cover.

    • Locate the RAM card at the top left corner closest to the bottom of the battery.

    • Using two fingers, push the two levers outwards in opposite directions of each other to release the RAM card.

    • When done correctly, the RAM card should pop up like this.

    • Remove the existing RAM card and insert the your new RAM by snapping the RAM in place. Make sure the notch on your RAM card matches up with the slot.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ian M Sloop

Miembro Desde 20/10/18

667 Reputación

4 Guías creadas

Equipo

UC Davis, Team S7-G7, Lore Fall 2018 Miembro de UC Davis, Team S7-G7, Lore Fall 2018

UCD-LORE-F18S7G7

4 Miembros

4 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 15