Saltar al contenido principal

Introducción

This guide will inform readers on how to replace the optical drive which may have stopped reading disks.

  1. Turn the laptop over to place it top down. Use a Phillips #1 screwdriver to remove the screw holding in the back plate. This screw does not come out of the plate. Lift the back plate off the laptop, exposing the RAM and Hard Disk.
    • Turn the laptop over to place it top down.

    • Use a Phillips #1 screwdriver to remove the screw holding in the back plate. This screw does not come out of the plate.

    • Lift the back plate off the laptop, exposing the RAM and Hard Disk.

  2. Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora

    Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora
  3. Using a Phillips #0 screwdriver, remove the single 3mm screw. Using a Phillips #0 screwdriver, remove the single 3mm screw.
    • Using a Phillips #0 screwdriver, remove the single 3mm screw.

  4. Rotate the laptop so that you have access to the optical drive. The optical drive is now only attached by a port in the drive's back. The optical drive can be pulled straight out of its housing.
    • Rotate the laptop so that you have access to the optical drive.

    • The optical drive is now only attached by a port in the drive's back. The optical drive can be pulled straight out of its housing.

    • Remove the drive.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Tyler Shafer

Miembro Desde 12/02/18

372 Reputación

3 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 82