Introducción

Replacing the hard drive in your laptop is a beginner level repair, which can easily be executed.

Partes

No se requieren partes.

  1. Unscrew the two screws holding the panel over the hard drive using a Phillips screwdriver. The panel is located on the top right of the laptop's underside. Unscrew the two screws holding the panel over the hard drive using a Phillips screwdriver. The panel is located on the top right of the laptop's underside.
    • Unscrew the two screws holding the panel over the hard drive using a Phillips screwdriver. The panel is located on the top right of the laptop's underside.

  2. Remove the cover, firmly lifting from the indent. It is recommended that you leave the screws in the panel.
    • Remove the cover, firmly lifting from the indent. It is recommended that you leave the screws in the panel.

  3. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda

    ¿Alguna vez arreglaste algo? Eso es genial.

    Comparte tu historia de reparación con #SoyUnGenio

    Todos somos Genios

    Comparte tu historia de reparación con #SoyUnGenio

  4. Remove the screw located under the plastic tab. Remove the screw located under the plastic tab.
    • Remove the screw located under the plastic tab.

  5. Remove the hard drive by pulling the tab upwards and sliding the hard drive out. Remove the hard drive by pulling the tab upwards and sliding the hard drive out.
    • Remove the hard drive by pulling the tab upwards and sliding the hard drive out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Jerry Wakai

Miembro Desde 31/01/13

335 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 7-7, Maness Winter 2013 Miembro de Cal Poly, Team 7-7, Maness Winter 2013

CPSU-MANESS-W13S7G7

5 Miembros

6 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 8

Últimos 30 Días: 36

Todo El Tiempo: 2,663