Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Close the laptop lid and flip it over so that Toshiba logo is facing down.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two 6.5 mm Phillips head screws indicated using a Phillips #00 screw driver.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Once the screws are removed, slide the battery pack out of the computer.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Anti-Static Wrist Strap$7.95-
Remove all 6.5 mm Philips head screws on the back cover of the laptop with a Philips #00 screwdriver.
-
Use the plastic opening tool to remove the back cover from the laptop.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Evenly press down on the clips on either side of the RAM stick.
-
To pull out the RAM stick, be sure to align the notches on the RAM stick with the notches in the RAM holder.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.
Un comentario
I’ve got this exact model. Stock 6GB of RAM. However, I’ve attempted to upgrade to 8GB and have tried multiple sticks of RAM and no matter what, the computer won’t recognize it. I’ve ensured it’s locked in properly, RAM is functional, even factory reset. All to no success. Any ideas?