Partes

No se requieren partes.

  1. Locate the two sliding battery locks on the underside of the laptop.
    • Locate the two sliding battery locks on the underside of the laptop.

    Agregar Comentario

  2. Locate the right battery lock and slide it to the right.
    • Locate the right battery lock and slide it to the right.

    Agregar Comentario

    • While holding the left battery lock to the left, lift up the battery using the tab located on the top center of the battery.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Remove the battery from the laptop.

    Agregar Comentario

    • Unscrew the RAM cover and rotate the cover up to remove it. The screw should not be fully removed from the cover itself.

    Agregar Comentario

    • Push the small levers at the sides of the RAM module away from each other. The RAM module should automatically rotate upwards.

    Agregar Comentario

    • Remove the RAM module by pulling it out at the angle it was rotated to.

    Agregar Comentario

    • If you want to replace the second RAM module, apply steps 2 and 3 to do so.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order. When placing the RAM chips in, push them down until the levers snap into place after inserting them into the slot.

Ricky Baker

Miembro Desde 26/03/14

217 Reputación

2 Guías creadas

Equipo

Clemson, Team 1-2, Benson Spring 2014 Miembro de Clemson, Team 1-2, Benson Spring 2014

CLEM-BENSON-S14S1G2

3 Miembros

10 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 4

Todo El Tiempo: 320