Saltar al contenido principal
  1. Este paso está sin traducir. Ayuda a traducirlo

    Place the laptop upside-down with the display hinges facing away from you.
    • Place the laptop upside-down with the display hinges facing away from you.

  2. Este paso está sin traducir. Ayuda a traducirlo

    Slide the latch for the left battery bay to the left.
    • Slide the latch for the left battery bay to the left.

  3. Este paso está sin traducir. Ayuda a traducirlo

    Slide the latch for the right battery bay to the right and hold. Continue to hold the latch while using a plastic opening tool to lift and remove the battery bay cover. Remove the battery.
    • Slide the latch for the right battery bay to the right and hold.

    • Continue to hold the latch while using a plastic opening tool to lift and remove the battery bay cover.

    • Remove the battery.

  4. Este paso está sin traducir. Ayuda a traducirlo

    Using a Phillips #1 screwdriver, turn the screw on the RAM cover until you hear a click.
    • Using a Phillips #1 screwdriver, turn the screw on the RAM cover until you hear a click.

    • This is a captive panel screw and remains with the cover.

  5. Este paso está sin traducir. Ayuda a traducirlo

    Remove the RAM cover by inserting the plastic opening tool into the indent and lifting. This is a captive panel screw and remains with the cover.
    • Remove the RAM cover by inserting the plastic opening tool into the indent and lifting.

    • This is a captive panel screw and remains with the cover.

  6. Este paso está sin traducir. Ayuda a traducirlo

    Push the white and silver retaining clips away from each side of the RAM card using your fingernails. The RAM card should pop up at an angle.
    • Push the white and silver retaining clips away from each side of the RAM card using your fingernails.

    • The RAM card should pop up at an angle.

  7. Este paso está sin traducir. Ayuda a traducirlo

    Pull the RAM card away from the computer. Repeat step 9 to remove the other RAM card that may be installed.
    • Pull the RAM card away from the computer.

    • Repeat step 9 to remove the other RAM card that may be installed.

Linea de Meta

Una persona más ha completado esta guía.

Equipo

Cal Poly, Team 3-49, Amido Spring 2013 Miembro de Cal Poly, Team 3-49, Amido Spring 2013

CPSU-AMIDO-S13S3G49

4 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 635