Introducción

Installing additional RAM modules will increase the performance of your laptop, and is relatively easy to do.

  1. Close the laptop lid and flip the laptop over.
    • Close the laptop lid and flip the laptop over.

    • Switch the lock button on the left to the unlock position. (The unlock position is to the left side.)

    Agregar Comentario

  2. Push the release button to the right.
    • Push the release button to the right.

    • Hold the release button to the right and lift the battery out of its housing.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Locate the RAM Module compartment on the bottom side of the laptop.

    • Carefully remove the 4.6mm 0 Phillips head screw and put it in a safe place.

    • Locate the notch on the screw side of the lid and lift to remove it.

    Agregar Comentario

    • Push the metal tabs on the sides of the RAM outward and the RAM will pop up.

    • Gently pull the RAM out.

    • Replace the RAM by sliding the new one into the angled socket similarly to how you removed the old RAM.

    • Gently apply pressure until the metal tabs on the sides click into place.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Equipo

Cal Poly, Team 20-5, Maness Winter 2013 Miembro de Cal Poly, Team 20-5, Maness Winter 2013

CPSU-MANESS-W13S20G5

4 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 8

Últimos 30 Días: 52

Todo El Tiempo: 5,940