Saltar al contenido principal

Introducción

The fan is what keeps the laptop from overheating so that the laptop can keep running the programs and surfing the web without slowing down. If the laptop persists in being uncomfortably hot, even after air dusting the fan several times, then replacing the fan may be needed.

Partes

No se especificaron partes.

  1. Make sure the device is off and is not charging by an adapter.
    • Make sure the device is off and is not charging by an adapter.

    • Flip the laptop so that the back panel is visible.

  2. Unscrew twelve 5 mm  screws from the back panel with the Phillips #1 screwdriver. Unscrew twelve 5 mm  screws from the back panel with the Phillips #1 screwdriver.
    • Unscrew twelve 5 mm screws from the back panel with the Phillips #1 screwdriver.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. Pry the back panel open with the plastic spudger.
    • Pry the back panel open with the plastic spudger.

    • Pry it gently so that the back panel does not crack.

    • You could also pry the back panel open with your nails.

  5. Remove the two 5 mm screws using a Phillips #1 screwdriver. Remove the two 5 mm screws using a Phillips #1 screwdriver.
    • Remove the two 5 mm screws using a Phillips #1 screwdriver.

  6. Gently disconnect the fan cable from the device.
    • Gently disconnect the fan cable from the device.

  7. Move the wires away from the fan’s hook. Remove the fan from the device.
    • Move the wires away from the fan’s hook.

    • Remove the fan from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Jose Marques

Miembro Desde 01/11/18

373 Reputación

2 Guías creadas

Equipo

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 8

Todo El Tiempo: 77