Saltar al contenido principal

Introducción

The fan is what keeps the laptop from overheating so that the laptop can keep running the programs and surfing the web without slowing down. If the laptop persists in being uncomfortably hot, even after air dusting the fan several times, then replacing the fan may be needed.

Partes

No se especificaron partes.

  1. Remove the twelve 5 mm  Phillips #1   screws from the back panel.
    • Remove the twelve 5 mm Phillips #1 screws from the back panel.

  2. Pry the back panel open with the plastic spudger or fingernails.
    • Pry the back panel open with the plastic spudger or fingernails.

    • Pry it gently so that the back panel does not crack.

  3. Skip the upgrade.

    Descuento de $10 en tu factura de $50 con
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  4. Remove the two 5 mm screws using a Phillips #1 screwdriver. Remove the two 5 mm screws using a Phillips #1 screwdriver.
    • Remove the two 5 mm screws using a Phillips #1 screwdriver.

  5. Gently disconnect the fan cable from the device.
    • Gently disconnect the fan cable from the device.

  6. Move the wires away from the fan’s hook. Remove the fan from the device.
    • Move the wires away from the fan’s hook.

    • Remove the fan from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Jose Marques

Miembro Desde 01/11/18

373 Reputación

2 Guías creadas

Equipo

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 5

Últimos 30 Días: 11

Todo El Tiempo: 119