Saltar al contenido principal

Introducción

The back panel is the gatekeeper that holds all the components of the device inside. If the back panel needs to be taken out for access to the other components or that the back panel is damaged, then this guide will illustrate how to remove it.

Partes

No se especificaron partes.

  1. Make sure the device is off and is not charging by an adapter.
    • Make sure the device is off and is not charging by an adapter.

    • Flip the laptop so that the back panel is visible.

  2. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  3. Unscrew twelve 5 mm  screws from the back panel with the Phillips #1 screwdriver. Unscrew twelve 5 mm  screws from the back panel with the Phillips #1 screwdriver.
    • Unscrew twelve 5 mm screws from the back panel with the Phillips #1 screwdriver.

  4. Pry the back panel open with the plastic spudger.
    • Pry the back panel open with the plastic spudger.

    • Pry it gently so that the back panel does not crack.

    • You could also pry the back panel open with your nails.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

James Nguyen

Miembro Desde 23/10/18

546 Reputación

5 Guías creadas

Equipo

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 73