Saltar al contenido principal

Introducción

The solid state drive, or SSD in short, has the same functionality of the hard drive in storing data, but without a magnet. If the SSD is damaged from long time use or being given the wrong data, then a replacement for the SSD may be necessary.

Partes

No se especificaron partes.

  1. Remove the twelve 5 mm  Phillips #1   screws from the back panel.
    • Remove the twelve 5 mm Phillips #1 screws from the back panel.

  2. Pry the back panel open with the plastic spudger or fingernails.
    • Pry the back panel open with the plastic spudger or fingernails.

    • Pry it gently so that the back panel does not crack.

  3. Remove the single 3 mm black screw using a Phillips #1 screwdriver. Remove the single 3 mm black screw using a Phillips #1 screwdriver.
    • Remove the single 3 mm black screw using a Phillips #1 screwdriver.

  4. Pull the SSD away from the motherboard.
    • Pull the SSD away from the motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

James Nguyen

Miembro Desde 23/10/18

546 Reputación

5 Guías creadas

Equipo

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 5

Todo El Tiempo: 75