Saltar al contenido principal

Introducción

The motherboard is the base for all of the parts of the laptop to communicate with each other. When the motherboard is damaged such that certain functions of the laptop won’t work, then a replacement for the motherboard may be necessary.

Partes

No se especificaron partes.

  1. Make sure the device is off and is not charging by an adapter.
    • Make sure the device is off and is not charging by an adapter.

    • Flip the laptop so that the back panel is visible.

  2. Unscrew twelve 5 mm  screws from the back panel with the Phillips #1 screwdriver. Unscrew twelve 5 mm  screws from the back panel with the Phillips #1 screwdriver.
    • Unscrew twelve 5 mm screws from the back panel with the Phillips #1 screwdriver.

  3. Pry the back panel open with the plastic spudger.
    • Pry the back panel open with the plastic spudger.

    • Pry it gently so that the back panel does not crack.

    • You could also pry the back panel open with your nails.

  4. Remove the three 7mm black screws using the Phillips #1 screwdriver.
    • Remove the three 7mm black screws using the Phillips #1 screwdriver.

  5. Remove the hard drive’s connection port with grooved tweezers.
    • Remove the hard drive’s connection port with grooved tweezers.

  6. Pull the hard drive out of the hook and remove it from the device. Pull the hard drive out of the hook and remove it from the device.
    • Pull the hard drive out of the hook and remove it from the device.

  7. Remove the two 5 mm screws using a Phillips #1 screwdriver. Remove the two 5 mm screws using a Phillips #1 screwdriver.
    • Remove the two 5 mm screws using a Phillips #1 screwdriver.

  8. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  9. Gently disconnect the fan cable from the device.
    • Gently disconnect the fan cable from the device.

  10. Move the wires away from the fan’s hook. Remove the fan from the device.
    • Move the wires away from the fan’s hook.

    • Remove the fan from the device.

  11. Remove the three 5 mm screws using a Phillips #1 screwdriver.
    • Remove the three 5 mm screws using a Phillips #1 screwdriver.

  12. Pry the heat sink away from the laptop with two hands at both ends and remove it from the device. The heat sink is glued to a gray paste called thermal paste. Do not touch the paste. The heat sink is glued to a gray paste called thermal paste. Do not touch the paste.
    • Pry the heat sink away from the laptop with two hands at both ends and remove it from the device.

    • The heat sink is glued to a gray paste called thermal paste. Do not touch the paste.

  13. Remove the single screw that is near the battery using the same screwdriver.
    • Remove the single screw that is near the battery using the same screwdriver.

  14. Disconnect the cord from the motherboard.
    • Disconnect the cord from the motherboard.

  15. Remove the battery from the laptop. Remove the battery from the laptop.
    • Remove the battery from the laptop.

  16. Remove the single 7 mm silver screw using a Phillips #1 screwdriver. Remove the single 7 mm silver screw using a Phillips #1 screwdriver.
    • Remove the single 7 mm silver screw using a Phillips #1 screwdriver.

  17. Pull metal stick holder until it is upright.
    • Pull metal stick holder until it is upright.

  18. Remove the 7 mm silver screw under the metal bar using the Phillips #1 screwdriver. Remove the 7 mm silver screw under the metal bar using the Phillips #1 screwdriver.
    • Remove the 7 mm silver screw under the metal bar using the Phillips #1 screwdriver.

  19. Disconnect the six connectors from the device. For the monitor port, pull it from the black tab. For the connection port with the blue strip, lift the white placeholder before pulling the blue strip out of the connection port.
    • Disconnect the six connectors from the device.

    • For the monitor port, pull it from the black tab.

    • For the connection port with the blue strip, lift the white placeholder before pulling the blue strip out of the connection port.

  20. Pull out 2 plugs out from the wireless network card. Pull out 2 plugs out from the wireless network card.
    • Pull out 2 plugs out from the wireless network card.

  21. Remove the motherboard from the device.
    • Remove the motherboard from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

James Nguyen

Miembro Desde 23/10/18

546 Reputación

5 Guías creadas

Equipo

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 7

Todo El Tiempo: 103