Repara tus cosas Comunidad Tienda

Toshiba Satellite Click 2 Pro Motherboard Replacement

Introducción

To attempt this guide, make sure to have all required materials and tools. This guide is the longest and most difficult of all the guides. Requires your full attention in to properly replace it.

Qué necesitas

  1. Toshiba Satellite Click 2 Pro Motherboard Replacement, Battery: paso 1, imagen 1 de 2 Toshiba Satellite Click 2 Pro Motherboard Replacement, Battery: paso 1, imagen 2 de 2

    • Working on your device while it is turned on may result in electric shock. Make sure to shut down and unplug your device before you begin.

    • Push down on the tablet sides until you feel a click, then pull up.

    • This will separate the tablet from the detachable base, make sure to hold down the keyboard for easier detachment.

    Editar

  2. Toshiba Satellite Click 2 Pro Motherboard Replacement: paso 2, imagen 1 de 3 Toshiba Satellite Click 2 Pro Motherboard Replacement: paso 2, imagen 2 de 3 Toshiba Satellite Click 2 Pro Motherboard Replacement: paso 2, imagen 3 de 3

    • Remove the base of the tablet from the screen using a plastic opening tool.

    • Make sure to separate the base evenly on both sides when removing it from the screen.

    Editar

  3. Toshiba Satellite Click 2 Pro Motherboard Replacement: paso 3, imagen 1 de 2 Toshiba Satellite Click 2 Pro Motherboard Replacement: paso 3, imagen 2 de 2
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • Remove the battery power connector using ESD safe tweezers.

    Editar

  4. Toshiba Satellite Click 2 Pro Motherboard Replacement: paso 4, imagen 1 de 2 Toshiba Satellite Click 2 Pro Motherboard Replacement: paso 4, imagen 2 de 2

    • Remove the LED ribbon cable using ESD safe tweezers.

    • Remove the SIM card ribbon cable using ESD safe tweezers.

    • Remove the Docking connector ribbon cable using plastic opening tool.

    • The ribbons may be stuck to the battery so make sure to peel off gently to prevent damage.

    • Make sure to flip up the white connector attached to the LED and Sim Card ribbons before removing them .

    Editar

  5. Toshiba Satellite Click 2 Pro Motherboard Replacement: paso 5, imagen 1 de 3 Toshiba Satellite Click 2 Pro Motherboard Replacement: paso 5, imagen 2 de 3 Toshiba Satellite Click 2 Pro Motherboard Replacement: paso 5, imagen 3 de 3

    • Remove the LCD Display ribbon cable using a plastic opening tool.

    • Remove the I/O ribbon cable using a plastic opening tool.

    • The ribbons may be stuck to the battery so make sure to peel them off gently to prevent damage.

    Editar

  6. Toshiba Satellite Click 2 Pro Motherboard Replacement: paso 6, imagen 1 de 2 Toshiba Satellite Click 2 Pro Motherboard Replacement: paso 6, imagen 2 de 2

    • Remove five 3.5mm Phillips J0 screws using a Phillips screw driver.

    Editar

  8. Toshiba Satellite Click 2 Pro Motherboard Replacement: paso 7, imagen 1 de 1

    • Remove the battery from its holding position.

    Editar

  9. Toshiba Satellite Click 2 Pro Motherboard Replacement, Heat Sync Fan: paso 8, imagen 1 de 1
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • Remove the power connector from the fan using a pair of tweezers.

    Editar

  10. Toshiba Satellite Click 2 Pro Motherboard Replacement: paso 9, imagen 1 de 1

    • Remove two 3.0mm Phillips J0 screws using a Phillips screw driver.

    Editar

  11. Toshiba Satellite Click 2 Pro Motherboard Replacement: paso 10, imagen 1 de 1

    • Remove four 3.5mm Phillips J0 screws from the heat sink.

    Editar

  12. Toshiba Satellite Click 2 Pro Motherboard Replacement: paso 11, imagen 1 de 1

    • Remove the heat sink fan.

    • The heat sink cover may be hard to peel off the first time due to the adhesive.

    Editar

  13. Toshiba Satellite Click 2 Pro Motherboard Replacement, Wifi Card: paso 12, imagen 1 de 1

    • Remove the 3mm screw J0 Phillips screw with the Philips screw driver.

    Editar

  14. Toshiba Satellite Click 2 Pro Motherboard Replacement: paso 13, imagen 1 de 1
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • Remove the black and white cables attached using ESD safe tweezers.

    Editar

  15. Toshiba Satellite Click 2 Pro Motherboard Replacement: paso 14, imagen 1 de 1

    • Remove wifi card.

    Editar

  16. Toshiba Satellite Click 2 Pro Motherboard Replacement, Motherboard: paso 15, imagen 1 de 1
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • Locate and remove the five connectors using ESD safe tweezers.

    Editar

  17. Toshiba Satellite Click 2 Pro Motherboard Replacement: paso 16, imagen 1 de 2 Toshiba Satellite Click 2 Pro Motherboard Replacement: paso 16, imagen 2 de 2

    • Remove the four 3.0mm Phillips J0 screws using a Phillips screw driver.

    Editar

  18. Toshiba Satellite Click 2 Pro Motherboard Replacement: paso 17, imagen 1 de 1

    • Remove the motherboard.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Paul DeOrsey

Miembro Desde 03/10/16

893 Reputación

5 Guías creadas

Insignias: 13

+ 10 más insignias

Equipo

UMass Dartmouth, Team 4-3, Catania Spring 2016 Miembro de UMass Dartmouth, Team 4-3, Catania Spring 2016

UMASSD-CATANIA-S16S4G3

3 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 7

Ultimos 30 días: 14

Todo El Tiempo: 1,188