Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Introducción

This guide teaches you how to remove your keyboard. Reverse the steps to replace with a new keyboard.

  1. Close the laptop, and flip it upside down. You want the spine to be furthest away from you. Close the laptop, and flip it upside down. You want the spine to be furthest away from you. Close the laptop, and flip it upside down. You want the spine to be furthest away from you.
    • Close the laptop, and flip it upside down. You want the spine to be furthest away from you.

  2. Release the locking mechanism by switching the left slider  to the left.
    • Release the locking mechanism by switching the left slider to the left.

  3. Slide the right slider to the right, and simultaneously, pull the battery out at a diagonal angle. Slide the right slider to the right, and simultaneously, pull the battery out at a diagonal angle.
    • Slide the right slider to the right, and simultaneously, pull the battery out at a diagonal angle.

  4. Remove the 3mm Phillips #00 screw holding the keyboard in place. Remove the 3mm Phillips #00 screw holding the keyboard in place.
    • Remove the 3mm Phillips #00 screw holding the keyboard in place.

  5. Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch

    Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch
  6. Flip over and open the laptop.
    • Flip over and open the laptop.

  7. Slip the plastic opening tool under the "Enter" key on the right corner of the keyboard.
    • Slip the plastic opening tool under the "Enter" key on the right corner of the keyboard.

    • Lift the plastic opening tool up until the corner of the keyboard is detached.

    • You will hear a popping sound as each portion of the keyboard becomes detached.

  8. Slide the plastic opening tool slowly along the bottom of the keyboard towards the left. Continue up the left side of the keyboard. Continue up the left side of the keyboard.
    • Slide the plastic opening tool slowly along the bottom of the keyboard towards the left.

    • Continue up the left side of the keyboard.

  9. Lift the keyboard up by grabbing it on both sides. Set the keyboard against the laptop screen.
    • Lift the keyboard up by grabbing it on both sides.

    • Set the keyboard against the laptop screen.

  10. Using tweezers, push up the two black switches on either side of the ZIF connector. Using tweezers, push up the two black switches on either side of the ZIF connector. Using tweezers, push up the two black switches on either side of the ZIF connector.
    • Using tweezers, push up the two black switches on either side of the ZIF connector.

  11. Pull out the ZIF connector to release the keyboard. Lift up the keyboard.
    • Pull out the ZIF connector to release the keyboard.

    • Lift up the keyboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

13 personas más completaron esta guía.

Kari Byrd

Miembro Desde 24/03/15

606 Reputación

1 Guía escrita

Equipo

Baylor, Team 6-5, Shaver Spring 2015 Miembro de Baylor, Team 6-5, Shaver Spring 2015

BU-SHAVER-S15S6G5

3 Miembros

4 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 31

Todo El Tiempo: 5,021