Repara tus cosas Comunidad Tienda

Toshiba Satellite C50D-A Power Jack Replacement

Introducción

In this guide, you will use a pry tool and a Phillips screwdriver to get to the power jack in order to replace or clean it. Should your power jack be defective or damaged, you can replace it with a new one.

Qué necesitas

  1. Toshiba Satellite C50D-A Power Jack Replacement, Battery: paso 1, imagen 1 de 1

    • Click button 1 to the unlocked position.

    • This button will have a 1 by it.

    Editar

  2. Toshiba Satellite C50D-A Power Jack Replacement: paso 2, imagen 1 de 2 Toshiba Satellite C50D-A Power Jack Replacement: paso 2, imagen 2 de 2

    • Push and hold button 2 to the left.

    • As you push button 2 to the left position, simultaneously lift up the battery pack.

    • This button will have a 2 by it.

    Editar

  3. Toshiba Satellite C50D-A Power Jack Replacement, Lower Case: paso 3, imagen 1 de 2 Toshiba Satellite C50D-A Power Jack Replacement, Lower Case: paso 3, imagen 2 de 2

    • Using the Phillips #1 screwdriver, remove the eleven 2.5mm screws.

    Editar

  5. Toshiba Satellite C50D-A Power Jack Replacement: paso 4, imagen 1 de 1

    • Remove the one 2.5mm Phillips #1 middle plate screw.

    Editar

  6. Toshiba Satellite C50D-A Power Jack Replacement: paso 5, imagen 1 de 1

    • Lift up the middle vent panel.

    • Set the panel to the side.

    Editar

  7. Toshiba Satellite C50D-A Power Jack Replacement: paso 6, imagen 1 de 3 Toshiba Satellite C50D-A Power Jack Replacement: paso 6, imagen 2 de 3 Toshiba Satellite C50D-A Power Jack Replacement: paso 6, imagen 3 de 3

    • Using the plastic opening tool, remove the outer panel and set to the side.

    • Be careful not to break the back of the computer.

    Editar

  8. Toshiba Satellite C50D-A Power Jack Replacement, Power Jack: paso 7, imagen 1 de 1

    • Locate the power jack at the back, right-hand side next to the USB port.

    Editar

  9. Toshiba Satellite C50D-A Power Jack Replacement: paso 8, imagen 1 de 1

    • Carefully unhook it from the attachment sites.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 8

Ultimos 30 días: 16

Todo El Tiempo: 1,020