Saltar al contenido principal

Toshiba Satellite A65-S126 Speaker Replacement

Qué necesitas

  1. Toshiba Satellite A65-S126 Speaker Replacement, Battery: paso 1, imagen 1 de 1
    • Flip the laptop over so the bottom is facing up.

    • Slide each of the three tabs on the bottom half of the assembly into the unlocked position.

  2. Toshiba Satellite A65-S126 Speaker Replacement: paso 2, imagen 1 de 1
    • Gently lift the battery out of the computer.

  3. Toshiba Satellite A65-S126 Speaker Replacement, Upper Assembly: paso 3, imagen 1 de 1
    • Remove the single 3mm Phillips #00 screw that secures the wireless card cover.

  4. Toshiba Satellite A65-S126 Speaker Replacement: paso 4, imagen 1 de 1
    • Remove the WIFI module cover. It will pull right off.

  5. Toshiba Satellite A65-S126 Speaker Replacement: paso 5, imagen 1 de 2 Toshiba Satellite A65-S126 Speaker Replacement: paso 5, imagen 2 de 2
    • Unplug the white and black wires from the WiFi module.

  6. Toshiba Satellite A65-S126 Speaker Replacement: paso 6, imagen 1 de 1
    • Remove the twelve 8mm button head Phillips #00 B8 screws.

    • Remove the two 14 mm button head Phillips #00 B14 screws.

    • Remove the two 10 mm Phillips #00 battery compartment screws.

    • Remove the two 8 mm Phillips #00 screws.

  7. Toshiba Satellite A65-S126 Speaker Replacement: paso 7, imagen 1 de 1
    • Remove the seven 4mm flat Phillips #00 screws.

    • Remove the seven 20mm button head Phillips #00 screws.

  8. Toshiba Satellite A65-S126 Speaker Replacement: paso 8, imagen 1 de 1
    • Use the plastic opening tool to pry the two halves apart.

  9. Toshiba Satellite A65-S126 Speaker Replacement, Speaker: paso 9, imagen 1 de 2 Toshiba Satellite A65-S126 Speaker Replacement, Speaker: paso 9, imagen 2 de 2
    • Locate the plug for the speaker wires on the bottom of the laptop.

  10. Toshiba Satellite A65-S126 Speaker Replacement: paso 10, imagen 1 de 1
    • Unplug the speaker wire connector.

  11. Toshiba Satellite A65-S126 Speaker Replacement: paso 11, imagen 1 de 1
    • Remove the speakers by sliding them straight up. They should slide out with ease.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Cole Uhland

Miembro Desde 09/30/13

216 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 14-8, Forte Fall 2013 Miembro de Cal Poly, Team 14-8, Forte Fall 2013

CPSU-FORTE-F13S14G8

4 Miembros

8 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 525