Introducción

Remove the hard drive if it fails or if it is time for it to be upgraded.

Partes

No se requieren partes.

Remove the two flat-head 4mm screws indicated in the photo with a Phillips 00 Screwdriver.
  • Remove the two flat-head 4mm screws indicated in the photo with a Phillips 00 Screwdriver.

Agregar Comentario

Remove the hard drive cover.
  • Remove the hard drive cover.

Agregar Comentario

Place the new hard drive in the bay. Plug its cable into the connector slot shown in the photo.
  • Place the new hard drive in the bay. Plug its cable into the connector slot shown in the photo.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Daniel Johnson

Miembro Desde 07/04/13

97 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 17-6, Regan Spring 2013 Miembro de Cal Poly, Team 17-6, Regan Spring 2013

CPSU-REGAN-S13S17G6

5 Miembros

11 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 1

Últimos 30 Días: 15

Todo El Tiempo: 1,429