Introducción

If your keys are not typing anything or the way they should, then check this guide to see how to safely remove and replace the keyboard input device on the computer. It will also contain detailed pictures on what to expect and watch out for, such as ribbons or wires.

Partes

No se requieren partes.

  1. Make sure your computer is turned off and the computer is not plugged in.
    • Make sure your computer is turned off and the computer is not plugged in.

    • Turn your laptop upside down, and slide the right release tab outward.

    • Using you left hand, hold the left release tab towards the left side and then pull the battery out.

    Agregar Comentario

  2. Remove the lower half of the laptop and lay upper half on its top.
    • Remove the lower half of the laptop and lay upper half on its top.

    Agregar Comentario

    • Using the Phillips screwdriver remove the two 4.0mm screws holding each of the speakers housings to the case.

    • Remove the speakers from the case being careful of the wires.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • The wires for the speakers are color coded.The red and black wires are for the right speaker, and the black and white wires are for the left speaker.

    Agregar Comentario

    • Flip the laptop over so it is rightside up, and open the laptop all the way so that the screen is horizontal.

    Agregar Comentario

    • Using the plastic opening tool, pry off the panel above the keyboard, starting near the right front speaker.

    • Use the plastic opening tool to pop off tabs along the length of this panel.

    • This may feel like you're about to break something, but as long as you work your way down the panel and don't yank it out, the laptop will be fine.

    Agregar Comentario

    • Unscrew the two 4.5 mm screws holding the keyboard on with the Phillips #1 screwdriver.

    Agregar Comentario

    • Lift the keyboard gently from the side closest the screen.

    • Pull out the ribbon connecting the keyboard to the laptop.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

pfedigan

Miembro Desde 12/04/13

11 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 2-23, Maness Spring 2013 Miembro de Cal Poly, Team 2-23, Maness Spring 2013

CPSU-MANESS-S13S2G23

4 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 7

Todo El Tiempo: 1,145