Introducción

For the individual who constantly needs to run lots of programs at once, RAM that comes with a laptop often isn't enough. This guide shows you how to replace RAM that is either too small or gone bad.

Partes

No se requieren partes.

  1. Using a Phillips screwdriver, unscrew and remove two screws labeled F4 from the plastic piece on the back of the laptop with the RAM indicator.
    • Using a Phillips screwdriver, unscrew and remove two screws labeled F4 from the plastic piece on the back of the laptop with the RAM indicator.

    Agregar Comentario

  2. Using a flathead screwdriver or a shiv, insert the flathead of the screwdriver in the space between the plastic piece and the rest of the laptop. Pry the plastic piece off by moving the flathead screwdriver up and down.
    • Using a flathead screwdriver or a shiv, insert the flathead of the screwdriver in the space between the plastic piece and the rest of the laptop. Pry the plastic piece off by moving the flathead screwdriver up and down.

    Agregar Comentario

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Using your fingers, push two shorter sides of RAM away from each other.

    • Note: The RAM should pop up automatically.

    Agregar Comentario

    • Using your fingers, pull RAM out of the laptop by gentling lifting up.

    • When reinstalling ram be sure to line up the ram correctly with the slot and notch in the ram

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Hannah

Miembro Desde 24/06/10

209 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 3-5, Johann Summer 2010 Miembro de Cal Poly, Team 3-5, Johann Summer 2010

CPSU-JOHANN-R10S3G5

4 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 2,506