Saltar al contenido principal
  1. Remove the thirteen 1.4mm screws using a Phillips #2 screwdriver.
    • Remove the thirteen 1.4mm screws using a Phillips #2 screwdriver.

  2. Locate hidden screw found in the middle of back hardcover.
    • Locate hidden screw found in the middle of back hardcover.

    • Found under rubber covering shown in picture.

    • Remove the single Torx Security screw using a TR7 screwdriver.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. Peel off hard cover to expose interior of device.
    • Peel off hard cover to expose interior of device.

  5. Find the solid-state drive located below the battery, and next to the RAM.
    • Find the solid-state drive located below the battery, and next to the RAM.

    • Unscrew the two 1mm screws located at the top of the solid-state drive with a Phillips #1 screwdriver.

  6. Pull the solid-state drive from its socket
    • Pull the solid-state drive from its socket

    • The solid-state drive should automatically pop-up from its housing once the screws are removed.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 14

Todo El Tiempo: 211