Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

In this guide we will remove the screen from a Toshiba Portege R835-P56X

  1. Place the laptop with the battery facing up.
    • Place the laptop with the battery facing up.

    • Make sure the laptop is powered off and unplugged.

  2. Unlock the clips by pulling towards the open lock. Unlock the clips by pulling towards the open lock.
    • Unlock the clips by pulling towards the open lock.

  3. Hold the unlock clip while pulling the battery away from the laptop. Hold the unlock clip while pulling the battery away from the laptop. Hold the unlock clip while pulling the battery away from the laptop.
    • Hold the unlock clip while pulling the battery away from the laptop.

  4. Use the screwdriver to unscrew 18 screws. Remove the back cover of the laptop. Remove the back cover of the laptop.
    • Use the screwdriver to unscrew 18 screws.

    • Remove the back cover of the laptop.

  5. Remove the screw from the metal hinges in the top corners of the laptop as shown in the picture.
    • Remove the screw from the metal hinges in the top corners of the laptop as shown in the picture.

  6. Disconnect the white plug with red and black wires located on the right-most upper corner with the chrome hinges pointed farthest away from you.
    • Disconnect the white plug with red and black wires located on the right-most upper corner with the chrome hinges pointed farthest away from you.

  7. Remove the chrome hinges using the blue prying tool. The hinges should pop right off without must effort. Remove the chrome hinges using the blue prying tool. The hinges should pop right off without must effort.
    • Remove the chrome hinges using the blue prying tool. The hinges should pop right off without must effort.

  8. Remove the screws located underneath the hinges.
    • Remove the screws located underneath the hinges.

  9. Using tweezers, remove the plastic caps from the top edge of the laptop screen, located near the front-facing camera. All but the cap closest to the camera should be removed.
    • Using tweezers, remove the plastic caps from the top edge of the laptop screen, located near the front-facing camera. All but the cap closest to the camera should be removed.

  10. Remove the screws located underneath the plastic caps.
    • Remove the screws located underneath the plastic caps.

  11. Snap the laptop screen casing off.
    • Snap the laptop screen casing off.

  12. Disconnect the grey mesh wire from underneath the unattached laptop screen. Disconnect the grey mesh wire from underneath the unattached laptop screen.
    • Disconnect the grey mesh wire from underneath the unattached laptop screen.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 5

Todo El Tiempo: 331