Introducción

In this guide, you will learn how to disassemble the broken/damaged keyboard from the rest of the laptop as well as how to replace it. This guide will also teach you what the proper and necessary tools are for this repair.

  1. Remove the front face plate with a plastic prying tool.
    • Remove the front face plate with a plastic prying tool.

    • Use a #1 Phillips screwdriver to unscrew and remove the two 3.8mm screws labeled B3.

    Agregar Comentario

  2. Use your hands to lift the keyboard toward you starting from the edge closest to the screen.
    • Use your hands to lift the keyboard toward you starting from the edge closest to the screen.

    • Note: This ribbon still connects the taptor to the keyboard.

    • Gently place the keyboard on top of the trackpad with the keys side down.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Find the white ribbon connector (where the keyboard is still attached to the rest of the laptop).

    • Remove the screw on the metal plate that keeps the ribbon from sliding out.

    • Gently remove the metal plate and set it aside.

    Agregar Comentario

    • Use the plastic opener tools to dislodge the white ribbon connector from the two clips.

    • Use your fingers to pull out the white ribbon connector.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Varsha Roopreddy

Miembro Desde 19/04/13

1 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 4-17, Maness Spring 2013 Miembro de Cal Poly, Team 4-17, Maness Spring 2013

CPSU-MANESS-S13S4G17

3 Miembros

4 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 3

Todo El Tiempo: 760