Repara tus cosas Comunidad Tienda

Toshiba Portege M300 Wireless Card Replacement

Introducción

This guide will go through the steps needed to install a new wireless card.

Qué necesitas

  1. Toshiba Portege M300 Wireless Card Replacement, Battery: paso 1, imagen 1 de 1

    • Turn the computer over onto its back.

    Editar

  2. Toshiba Portege M300 Wireless Card Replacement: paso 2, imagen 1 de 2 Toshiba Portege M300 Wireless Card Replacement: paso 2, imagen 2 de 2

    • Slide the lock on the left side to the unlock position.

    • Slide the lock on the right side to the unlock position until there is a clicking sound.

    Editar

  4. Toshiba Portege M300 Wireless Card Replacement: paso 3, imagen 1 de 2 Toshiba Portege M300 Wireless Card Replacement: paso 3, imagen 2 de 2

    • Remove the battery by sliding it away from the laptop.

    • Make sure the two locks from the previous step are in the unlocked position while sliding the battery away.

    Editar

  5. Toshiba Portege M300 Wireless Card Replacement, Wireless Card: paso 4, imagen 1 de 3 Toshiba Portege M300 Wireless Card Replacement, Wireless Card: paso 4, imagen 2 de 3 Toshiba Portege M300 Wireless Card Replacement, Wireless Card: paso 4, imagen 3 de 3

    • Turn the computer onto the back.

    • Remove the Phillips #0 screw that secures the cover to the rest of the device.

    • One 5.1 mm coarse thread screw.

    • Pull the cover forward to release it.

    Editar

  6. Toshiba Portege M300 Wireless Card Replacement: paso 5, imagen 1 de 3 Toshiba Portege M300 Wireless Card Replacement: paso 5, imagen 2 de 3 Toshiba Portege M300 Wireless Card Replacement: paso 5, imagen 3 de 3

    • Use a Phillips #1 screwdriver to remove the two screws on opposite corners of the wireless card.

    • Two 4.0 mm coarse thread screws.

    • Use a plastic opening tool to gently lift the wireless card out while leaving the wire connected.

    Editar

  7. Toshiba Portege M300 Wireless Card Replacement: paso 6, imagen 1 de 2 Toshiba Portege M300 Wireless Card Replacement: paso 6, imagen 2 de 2

    • Hold the edges of the wireless card and carefully disconnect the black 3 pin connector.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 7 otros colaboradores

Alison Wendt

Miembro Desde 04/18/13

135 Reputación

6 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

Cal Poly, Team 21-51, Johann Spring 2013 Miembro de Cal Poly, Team 21-51, Johann Spring 2013

CPSU-JOHANN-S13S21G51

3 Miembros

18 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 819