Toshiba Portege M300 LCD Replacement

Introducción

This guide will go through the steps needed to install a new LCD panel. It's a fairly quick procedure, but it does require some care as it involves very delicate components and short wires that aren't immediately visible. This should be a fairly easy repair if you take it slowly and don't move anything around too roughly—displays are delicate components! Good luck!

Qué necesitas

Paso 1 Battery

Toshiba Portege M300 LCD Replacement, Battery: paso 1, imagen 1 de 1

Turn the computer over onto its back.

Editar

Paso 2

Slide the lock on the left side to the unlock position.
Slide the lock on the right side to the unlock position until there is a clicking sound.

Editar

Paso 3

Remove the battery by sliding it away from the laptop.
Make sure the two locks from the previous step are in the unlocked position while sliding the battery away.

Editar

Paso 4 LCD

Toshiba Portege M300 LCD Replacement, LCD: paso 4, imagen 1 de 2

Toshiba Portege M300 LCD Replacement, LCD: paso 4, imagen 2 de 2

Use a plastic opening tool to unsnap the right hand side speaker cover.

Editar

Paso 5

Remove the rest of the cover by sliding it to the right and lifting the right edge.

Editar

Paso 6

Remove all eight plastic circular covers on the plastic screen bezel.
Only seven of these plastic covers will contain screws underneath.
Unscrew all seven screws with a Phillips head #000 screwdriver.

Editar

Paso 7

Use a plastic opening tool to separate the screen bezel from the rest of the case.
Pull at the top edge of the LCD to separate it from the top part of the case.
Only separate the casing and the LCD by an inch—there are still wires connecting them.