Repara tus cosas Comunidad Tienda

Toshiba NB205 N330PK Speaker Removal

Qué necesitas

  1. Toshiba NB205 N330PK Speaker Removal, Power Button: paso 1, imagen 1 de 2 Toshiba NB205 N330PK Speaker Removal, Power Button: paso 1, imagen 2 de 2

    • Start by first removing the battery.

    • Move the first release switch to the right position.

    • Move the second release switch to the right position while pulling the battery towards the top of the netbook.

    Editar

  2. Toshiba NB205 N330PK Speaker Removal: paso 2, imagen 1 de 2 Toshiba NB205 N330PK Speaker Removal: paso 2, imagen 2 de 2

    • Using the bit driver and a Phillips #0 bit, remove the three circled screws, 5 mm in length.

    • Using the bit driver and a Phillips #0 Bit, remove the two circled screws labelled F6. (These hold the keyboard) one screw may be under a rubber stopper

    Editar

  3. Toshiba NB205 N330PK Speaker Removal: paso 3, imagen 1 de 2 Toshiba NB205 N330PK Speaker Removal: paso 3, imagen 2 de 2

    • While holding the top of the netbook, flip the netbook over.

    Editar

  4. Toshiba NB205 N330PK Speaker Removal: paso 4, imagen 1 de 2 Toshiba NB205 N330PK Speaker Removal: paso 4, imagen 2 de 2

    • Carefully lift off the power bar assembly for access to the button and receiver.

    Editar

  6. Toshiba NB205 N330PK Speaker Removal, Speaker: paso 5, imagen 1 de 3 Toshiba NB205 N330PK Speaker Removal, Speaker: paso 5, imagen 2 de 3 Toshiba NB205 N330PK Speaker Removal, Speaker: paso 5, imagen 3 de 3

    • Use the spudger to gently pry around the seam of the keyboard. This will release the keyboard assembly from the body.

    Editar

  7. Toshiba NB205 N330PK Speaker Removal: paso 6, imagen 1 de 2 Toshiba NB205 N330PK Speaker Removal: paso 6, imagen 2 de 2

    • Reach under the keyboard and disconnect the electrical connection.

    • Lift the keyboard assembly out and away from the netbook.

    Editar

  8. Toshiba NB205 N330PK Speaker Removal: paso 7, imagen 1 de 2 Toshiba NB205 N330PK Speaker Removal: paso 7, imagen 2 de 2

    • Remove the two noted screws, 5 mm in length, with a bit driver and Phillips 3/16" tool.

    Editar

  9. Toshiba NB205 N330PK Speaker Removal: paso 8, imagen 1 de 2 Toshiba NB205 N330PK Speaker Removal: paso 8, imagen 2 de 2

    • Pull the cable away from the connector in the same direction as the individual wires using your hands or tweezers.

    • Pull evenly on the full width of the cable so that no individual wires are overly strained.

    • Use a spudger to gently pry the bezel from retaining clips.

    • This will allow the keyboard bezel to lift off of the body.

    Editar

  10. Toshiba NB205 N330PK Speaker Removal: paso 9, imagen 1 de 1

    • Use the pointed tip of a spudger to carefully push on each side of the speaker connector to release it. Alternating from one side to the other, gently “walk” the connector out of its socket.

    • Always pull cables by their connectors and not the wires themselves.

    Editar

  11. Toshiba NB205 N330PK Speaker Removal: paso 10, imagen 1 de 2 Toshiba NB205 N330PK Speaker Removal: paso 10, imagen 2 de 2

    • Use Phillips #0 screwdriver to remove the two retaining screws on the speaker assembly.

    • Lift out the old speaker assembly.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 6 otros colaboradores

Mason McCaskill

Miembro Desde 10/18/13

1,000 Reputación

9 Guías creadas

Insignias: 10

+ 7 más insignias

Equipo

Clemson, Team 14-2, Benson Fall 2013 Miembro de Clemson, Team 14-2, Benson Fall 2013

CLEM-BENSON-F13S14G2

3 Miembros

27 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 554