1. To expose the hard drive, use a bit driver and a Star #0 bit to remove the two designated screws. Gently lift the panel off.
    • To expose the hard drive, use a bit driver and a Star #0 bit to remove the two designated screws.

    • Gently lift the panel off.

  2. With the panel removed, slide the hard drive towards the top of the netbook with moderate force. This will free the hard drive from its original location.
    • With the panel removed, slide the hard drive towards the top of the netbook with moderate force.

    • This will free the hard drive from its original location.

  3. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Obtain a new hard drive. Apply firm pressure to secure the new hard drive into the old hard drive's location.
    • Obtain a new hard drive.

    • Apply firm pressure to secure the new hard drive into the old hard drive's location.

  5. Place the back panel in its original position. Using the bit driver and Phillips #0 bit, secure the hard drive panel to the netbook body.
    • Place the back panel in its original position.

    • Using the bit driver and Phillips #0 bit, secure the hard drive panel to the netbook body.

Linea de Meta

Una persona más ha completado esta guía.

Mason McCaskill

Miembro Desde 18/10/13

943 Reputación

9 Guías creadas

Equipo

Clemson, Team 14-2, Benson Fall 2013 Miembro de Clemson, Team 14-2, Benson Fall 2013

CLEM-BENSON-F13S14G2

3 Miembros

9 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 4

Últimos 30 Días: 13

Todo El Tiempo: 1,763