Saltar al contenido principal

Introducción

If you find that your power button is jammed or isn't working, use this guide to remove and replace the power button.

Partes

No se especificaron partes.

  1. Using your hands, pop off the black console from each hinge surrounding the case. There are a total of 7 hinges. There are a total of 7 hinges.
    • Using your hands, pop off the black console from each hinge surrounding the case.

    • There are a total of 7 hinges.

  2. With the inside of the console facing up, the power button will be encased in clear plastic located on the right side of the console.
    • With the inside of the console facing up, the power button will be encased in clear plastic located on the right side of the console.

  3. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  4. Use a Phillips #1 screwdriver to remove the single screw holding the power button to the console. After taking out the screw, the small piece of metal underneath will come loose. Carefully place this part aside.
    • Use a Phillips #1 screwdriver to remove the single screw holding the power button to the console.

    • After taking out the screw, the small piece of metal underneath will come loose. Carefully place this part aside.

  5. Using your fingers, gently pull out the power button. You can push it from the outside to help loosen it from its hinges.
    • Using your fingers, gently pull out the power button. You can push it from the outside to help loosen it from its hinges.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Nouriyah Saleh

Miembro Desde 22/10/18

749 Reputación

6 Guías creadas

Equipo

UC Davis, Team S11-G1, Lore Fall 2018 Miembro de UC Davis, Team S11-G1, Lore Fall 2018

UCD-LORE-F18S11G1

3 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 23