Introducción

This guide covers the removal of the main LCD screen and associated housing from the Toshiba A1304T for replacement.

Open the phone so that it matches the photos to the left.
  • Open the phone so that it matches the photos to the left.

  • Using a thumb-tack, push-pin, or similar pin, remove the four plastic stoppers located around the main LCD screen.

Agregar Comentario

With the T8 Torx Security Bit Screwdriver, remove the four screws in the designated locations.
  • With the T8 Torx Security Bit Screwdriver, remove the four screws in the designated locations.

  • The T8 Torx Security Bit Screwdriver can be substituted with a small flathead screwdriver. Screw removal may be slightly more difficult however.

Agregar Comentario

  • Insert the head of a flathead screwdriver into the seam between the front cover and the phone.

  • Pry gently until the cover gives slightly to create a slightly wider opening. You may hear a distinct pop as you pry.

  • Remove the screwdriver and re-insert it into another portion of the seam. Continue making gaps around the cover of the phone until it is completely detached from the body.

Agregar Comentario

  • Using the head of the flathead screwdriver, gently pry the black tab so that it rests in a vertical (or "unlocked") position.

  • Pull the orange ribbon-wire to the left, removing it from the white socket.

Agregar Comentario

  • Just as before, use the head of the flathead screwdriver to pry the black tab into a vertical position, as shown.

  • Pull the ribbon wire to the right, freeing it from its socket.

Agregar Comentario

  • Using the head of the flathead screwdriver, pry the silver plastic casing of the LCD from the video logic board.

  • Repeat as necessary around the device until the silver plastic casing is free.

  • Attempting to further separate the LCD screen from the silver plastic casing will likely result in severe damage to the screen.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Christopher

Miembro Desde 22/04/10

90 Reputación

16 Guías creadas

Equipo

Cal Poly, Team 16-6, Maness Spring 2010 Miembro de Cal Poly, Team 16-6, Maness Spring 2010

CPSU-MANESS-S10S16G6

4 Miembros

16 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 2

Todo El Tiempo: 1,561