Repara tus cosas Comunidad Tienda

Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.

Qué necesitas

  1. Este paso está sin traducir. Ayuda a traducirlo

    : paso 1, imagen 1 de 1

    • Slip a small plastic opening tool underneath the screen bezel, gently sliding it around the inside edge.

    • Starting at the corners, carefully pry up the screen bezel.

    Traducir

  2. Este paso está sin traducir. Ayuda a traducirlo

    : paso 2, imagen 1 de 1

    • Remove the four Phillips #00 screws around the edge of the screen.

    Traducir

  3. Este paso está sin traducir. Ayuda a traducirlo

    : paso 3, imagen 1 de 3 : paso 3, imagen 2 de 3 : paso 3, imagen 3 de 3

    • Slide a small plastic opening tool under the top portion of the metal frame and gently lift it up.

    • Slide the plastic opening tool around the inner edge of the metal frame until it feels loose.

    • It may take some time to release the frame from the housing. Some force may be necessary—but be careful not to bend the frame's fragile interior bracket.

    • Remove the frame from the housing.

    Traducir

  5. Este paso está sin traducir. Ayuda a traducirlo

    : paso 4, imagen 1 de 2 : paso 4, imagen 2 de 2

    • Lifting from the upper edge of the screen, tilt the screen away from the device.

    • Tilt the screen slowly. Flipping the screen up too quickly may damage the display cable.

    Traducir

  6. Este paso está sin traducir. Ayuda a traducirlo

    : paso 5, imagen 1 de 2 : paso 5, imagen 2 de 2

    • Remove the three Phillips #00 screws connecting the motherboard to the plastic housing:

    • Two Phillips #00 screws are located at the bottom of the first picture.

    • The third screw is hidden under the orange ribbon cable, near the screen.

    • You may have to carefully lift the screen in order to reach this screw.

    Traducir

  7. Este paso está sin traducir. Ayuda a traducirlo

    : paso 6, imagen 1 de 2 : paso 6, imagen 2 de 2

    • Flip the screen and motherboard over.

    • Gripping the plastic casing, disconnect the battery cable connector from the motherboard.

    • Disconnect the speaker cable connector from the motherboard.

    • Remove the motherboard and screen from the housing.

    Traducir

  8. Este paso está sin traducir. Ayuda a traducirlo

    : paso 7, imagen 1 de 1

    • Slip a small plastic opening tool under the battery and slowly pry the battery up.

    • The battery is held on with strong adhesive, so it may require some force. Work slowly and carefully to avoid damaging the housing

    • Remove the battery from the housing.

    Traducir
Linea de Meta

13 personas más completaron esta guía.

Autor

con 6 otros colaboradores

Sean Higginson

Miembro Desde 04/21/10

209 Reputación

2 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

Cal Poly, Team 33-84, Johann Spring 2010 Miembro de Cal Poly, Team 33-84, Johann Spring 2010

CPSU-JOHANN-S10S33G84

4 Miembros

5 Guías creadas

12 comentarios

Note: There are several variants of this. Some of them have 2 screws on the bottom under the stickers. You'll need to remove those first.

nathan - Contestar

Awesome and very detailed guide. Thanks for this.

Phil Harris - Contestar

Great demo, for replacement tomtom batteries take a look at : TomTom batteries

based in the UK they are reliable and give a truly longer charge

Kermit45 - Contestar

This was a great help. Followed the instructions and it was that easy. Thanks

mark - Contestar

nathanrenniewaldock is right... I cracked my screen before finding the hidden screws on the bottom. what a silly company to use the same name for different models!

Laz - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 7

Ultimos 30 días: 48

Todo El Tiempo: 51,491