Repara tus cosas Comunidad Tienda

TomTom One XL Power Button Replacement

Introducción

This guide will teach you how to disassemble your TomTom One XL and expose the power button for cleaning or repair.

Qué necesitas

  1. TomTom One XL Power Button Replacement, Back Panel: paso 1, imagen 1 de 2 TomTom One XL Power Button Replacement, Back Panel: paso 1, imagen 2 de 2

    • Remove the 4 .4mm screws on the back of the device.

    Traducir

  2. TomTom One XL Power Button Replacement: paso 2, imagen 1 de 1

    • Using the palate knife tool, pry the back from the LCD screen. Apply a moderate pressure to separate them.

    • You can rotate TOMTOM XL to make prying back off easier.

    • Be careful not to injure the two wires connecting the pieces.

    Traducir

  3. TomTom One XL Power Button Replacement: paso 3, imagen 1 de 1

    • After prying both halves apart, they will be connected by two wires.

    • Carefully set the two halves next to each other making sure not to stress or damage the wires.

    Traducir

  5. TomTom One XL Power Button Replacement: paso 4, imagen 1 de 2 TomTom One XL Power Button Replacement: paso 4, imagen 2 de 2

    • Using the tweezers separate the wires connecting the battery and speaker to the mother board.

    • Be gentle while pulling the wires out, the plugs are easily injured.

    Traducir

  6. TomTom One XL Power Button Replacement, Power Button: paso 5, imagen 1 de 1

    • Using a Torx 6 screwdriver, remove the 4 .5mm screws connecting the motherboard to the screen assembly.

    • The motherboard is connected to the screen assembly via a ribbon wire. After removing the screws, be careful not to damage the wire or the port.

    Traducir

  7. TomTom One XL Power Button Replacement: paso 6, imagen 1 de 2 TomTom One XL Power Button Replacement: paso 6, imagen 2 de 2

    • Detach the ribbon wire from it's port on the back of the motherboard.

    Traducir

  8. TomTom One XL Power Button Replacement: paso 7, imagen 1 de 3 TomTom One XL Power Button Replacement: paso 7, imagen 2 de 3 TomTom One XL Power Button Replacement: paso 7, imagen 3 de 3

    • Now the power button is exposed and any obstructions can be easily removed.

    • If you want to replace the button it can easily be popped out using your hands.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Jesse

Miembro Desde 03/11/15

101 Reputación

1 Guía escrita

Insignias: 6

+ 3 más insignias

Equipo

Colorado Springs, Team 9-6, Panko Spring 2015 Miembro de Colorado Springs, Team 9-6, Panko Spring 2015

UCCS-PANKO-S15S9G6

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 12

Todo El Tiempo: 2,188