TomTom GO 500 Opening the Device - Guía de reparación iFixit

Qué necesitas

Paso 1 TomTom GO 500 Opening the Device

TomTom GO 500 Opening the Device, TomTom GO 500 Opening the Device: paso 1, imagen 1 de 1

Unscrew the two 3mm screws at the base of the device using the Torx T5 screwdriver.

Paso 2

TomTom GO 500 Opening the Device: paso 2, imagen 1 de 2

TomTom GO 500 Opening the Device: paso 2, imagen 2 de 2

Using the plastic opening tools, insert one opening tool into the gap between the screen casing and the motherboard casing. Then insert the other tool into one of the adjacent sides and slide it around the top.
There are 14 latches that need to be undone.
The latches break easily during the opening process so we recommend purchasing a new screen casing if they break.

Paso 3

TomTom GO 500 Opening the Device: paso 3, imagen 1 de 1

With the screen casing unlatched, locate the right side where the two connectors are.

Paso 4

TomTom GO 500 Opening the Device: paso 4, imagen 1 de 3

TomTom GO 500 Opening the Device: paso 4, imagen 2 de 3

TomTom GO 500 Opening the Device: paso 4, imagen 3 de 3

Unlatch the connectors using the plastic opening tool.
The orange rectangular connector may have come off in the process of removing the screen casing.

Paso 5

TomTom GO 500 Opening the Device: paso 5, imagen 1 de 2

TomTom GO 500 Opening the Device: paso 5, imagen 2 de 2

Separate the screen casing from the motherboard casing.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

jkl

Miembro Desde 09/22/16

486 Reputación

2 Guías creadas

+ 6 más insignias

Equipo

UC Davis, Team 2-5, Oliver Fall 2016 Miembro de UC Davis, Team 2-5, Oliver Fall 2016

UCD-OLIVER-F16S2G5

5 Miembros

9 Guías creadas

0 comentarios

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 195