Repara tus cosas Comunidad Tienda

TomTom GO 500 Motherboard Replacement

Introducción

The motherboard contains all of the device's ports while the speaker, battery, and microphone are separate from the motherboard. Confirm the device is powered off before starting the disassembly.

Qué necesitas

  1. TomTom GO 500 Motherboard Replacement, TomTom GO 500 Opening the Device: paso 1, imagen 1 de 1

    • Unscrew the two 3mm screws at the base of the device using the Torx T5 screwdriver.

    Editar

  2. TomTom GO 500 Motherboard Replacement: paso 2, imagen 1 de 2 TomTom GO 500 Motherboard Replacement: paso 2, imagen 2 de 2

    • Using the plastic opening tools, insert one opening tool into the gap between the screen casing and the motherboard casing. Then insert the other tool into one of the adjacent sides and slide it around the top.

    • There are 14 latches that need to be undone.

    • The latches break easily during the opening process so we recommend purchasing a new screen casing if they break.

    Editar

  3. TomTom GO 500 Motherboard Replacement: paso 3, imagen 1 de 1

    • With the screen casing unlatched, locate the right side where the two connectors are.

    Editar

  5. TomTom GO 500 Motherboard Replacement: paso 4, imagen 1 de 3 TomTom GO 500 Motherboard Replacement: paso 4, imagen 2 de 3 TomTom GO 500 Motherboard Replacement: paso 4, imagen 3 de 3

    • Unlatch the connectors using the plastic opening tool.

    • The orange rectangular connector may have come off in the process of removing the screen casing.

    Editar

  6. TomTom GO 500 Motherboard Replacement: paso 5, imagen 1 de 2 TomTom GO 500 Motherboard Replacement: paso 5, imagen 2 de 2

    • Separate the screen casing from the motherboard casing.

    Editar

  7. TomTom GO 500 Motherboard Replacement, Motherboard: paso 6, imagen 1 de 1

    • Unscrew the five 4mm screws using the Phillips #0 screwdriver.

    Editar

  8. TomTom GO 500 Motherboard Replacement: paso 7, imagen 1 de 2 TomTom GO 500 Motherboard Replacement: paso 7, imagen 2 de 2
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • Unplug the connector shown near the center of the motherboard using the tweezers.

    Editar

  9. TomTom GO 500 Motherboard Replacement: paso 8, imagen 1 de 2 TomTom GO 500 Motherboard Replacement: paso 8, imagen 2 de 2

    • Unplug the second connector using the plastic opening tool.

    Editar

  10. TomTom GO 500 Motherboard Replacement: paso 9, imagen 1 de 2 TomTom GO 500 Motherboard Replacement: paso 9, imagen 2 de 2

    • Remove the motherboard from the casing.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Autor

con 3 otros colaboradores

jkl

Miembro Desde 09/22/16

486 Reputación

2 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

UC Davis, Team 2-5, Oliver Fall 2016 Miembro de UC Davis, Team 2-5, Oliver Fall 2016

UCD-OLIVER-F16S2G5

5 Miembros

9 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 5

Ultimos 30 días: 18

Todo El Tiempo: 1,581