Repara tus cosas Comunidad Tienda

Tineco FLOOR ONE S3 Breeze Brush Roller Replacement

Introducción

The Tineco FLOOR ONE S3 Breeze (model no. FW007600US) will sometimes have problems with the brush roller wearing out over time, and it may need to be replaced by removing the brush roller cover and removing the existing brush roller. After a quick reassembly the machine is ready to operate. This replacement guide contains the following steps for the brush roller replacement.

  1. Tineco FLOOR ONE S3 Breeze Brush Roller Replacement, Brush Roller: paso 1, imagen 1 de 2 Tineco FLOOR ONE S3 Breeze Brush Roller Replacement, Brush Roller: paso 1, imagen 2 de 2

    • Place a finger on the lever located on the brush roller cover.

    • Firmly push the lever with a finger to remove the brush roller cover.

    Editar

  3. Tineco FLOOR ONE S3 Breeze Brush Roller Replacement: paso 2, imagen 1 de 1

    • Grasp the brush roller on its side.

    • Pull the brush roller out of its initial position.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 3 otros colaboradores

Dawoud Daoud

Miembro Desde 02/14/24

199 Reputación

2 Guías creadas

Insignias: 3

Equipo

University of Memphis, Team 3-5, Sneed Spring 2024 Miembro de University of Memphis, Team 3-5, Sneed Spring 2024

UM-SNEED-S24S3G5

4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 5

Ultimos 7 días: 6

Ultimos 30 días: 14

Todo El Tiempo: 85